2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. They are designed for single or three phase AC motors. This nonreversing manual switches is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, 10 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This manual motor switch is not supplied with an enclosure. This switch is 4.13 inches tall, 1.69 inches wide and 2.34 inches deep. It weighs 0.35 lb. This device is UL Listed and CSA certified. Specifications Main Product Single Unit Manual Switch Type K Complementary Current Rating 30 A Horsepower Rating 2 hp 115 V AC 1 hp 90 V DC 2 hp 115 V DC 1.5 hp 230 V DC 7.5 hp 230 V AC 10 hp 460 V AC 10 hp 575 V AC Maximum Voltage Rating 600 V AC 230 V DC Number of Poles 3P Control Unit Type Toggle Number of Phases 3 phases Pilot Light No indicator Starter Type Non reversing Electrical Connection Screw clamp terminals Wire Gauge AWG 14...AWG 10 copper Height 4.13 in (104.90 mm) Width 1.69 in (42.93 mm) Depth 2.34 in (59.44 mm) Net weight 0.35 lb(US) (0.16 kg) Environment Certifications UL recognized E42243 CCN NLRV2 CSA LR25490 class 3211 05 NEMA Enclosure Rating Not rated (open device)