This Power Plug-In Relay reflects Schneider Electric expertise in relay since 1924 by helping to reduce the size of enclosures and at the same time increasing machine reliability. It has large choice of number of contacts for high rated current use Its rated current is 15 A, is controlled with a 24 V AC circuit and has a latching of 2 C/O. They are intendedfor industrial machines, packaging, textile, heating, ventilation and air conditioning system. Specifications Main Range of product Harmony Electromechanical Relays Series name Power Product or component type Plug-in relay Device short name RPM Contacts type and composition 2 C/O [Uc] control circuit voltage 24 V DC [Ithe] conventional enclosed thermal current 15 A -40.0000000000…131.0000000000 °F (-40…55 °C) Status LED With Control type Without lockable test button Utilisation coefficient 20 % Complementary Shape of pin Flat [Ui] rated insulation voltage 250 V IEC 300 V CSA 300 V UL [Uimp] rated impulse withstand voltage 4 kV 1.2/50 µs Contacts material AgNi [Ie] rated operational current 15 A 277 V AC) UL 15 A 28 V DC) UL 15 A 250 V AC) NO IEC 15 A 28 V DC) NO IEC 7.5 A 250 V AC) NC IEC 7.5 A 28 V DC) NC IEC Maximum switching voltage 250 V IEC Resistive load current 15 A 250 V AC 15 A 28 V DC Maximum switching capacity 3750 VA 420 W Minimum switching capacity 170 mW 10 mA, 17 V Operating rate <= 1200 cycles/hour under load <= 18000 cycles/hour no-load Mechanical durability 10000000 cycles Electrical durability 100000 cycles resistive Average coil consumption 0.85 W Drop-out voltage threshold >= 0.1 Uc DC Operate time 20 ms at nominal voltage Release time 20 ms at nominal voltage Average coil resistance 640 Ohm 68.0000000000 °F (20 °C) +/- 10 % Rated operational voltage limits 19.2...26.4 V DC Protection category RT I Test levels Level A group mounting Operating position Any position Pollution degree 3 Safety reliability data B10d = 100000 Net weight 0.079 lb(US) (0.036 kg) device presentation Complete product