This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete output module provides 8 relay outputs with sink or source (positive/negative) logic. It is an output module with an output voltage of 240V AC, 30V DC and a current consumption of 40mA at 24V DC via bus connector. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an insulation between output and supply at 1500V AC, output and internal logic at 500V AC. It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for outputs. It offers mechanical durability of 20 million cycles. It is an IP20 rated product. Its dimensions are 27.4mm (Width) x 84.6mm (Depth) x 90mm (Height). It weighs 0.13kg. This product is certified by CE, CULus and C-Tick. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers. Specifications Main Range of produc Modicon TM3 Product or component type Discrete output module Range compatibility Modicon M241 Modicon M251 Modicon M221 Modicon M262 Discrete output type Relay normally open Discrete output number 8 discrete output logic Positive or negative Discrete output voltage 24 V DC relay output 240 V AC Discrete output current 2000 mA relay output Complementary Discrete I/O number 8 Current consumption 5 mA 5 V DC via bus connector at state off) 0 mA 24 V DC via bus connector at state off) 40 mA 5 V DC via bus connector at state on) 30 mA 24 V DC via bus connector at state on) Response time 10 ms turn-on) 5 ms turn-off) Mechanical durability 20000000 cycles Minimum load 10 mA 5 V DC relay output Local signalling For output status 1 LED per channel (green) Electrical connection 11 x 2.5 mm² removable screw terminal block pitch 5.08 mm for outputs Maximum cable distance between devices Unshielded cable <98.43 ft (30 m) relay output Insulation Between output and internal logic 2300 V AC Between outputs 750 V AC Between output groups 1500 V AC Marking CE Mounting support Top hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 plate or panel with fixing kit height 3.54 in (90 mm) Depth 3.33 in (84.6 mm) Width 1.08 in (27.4 mm) Net weight 0.24 lb(US) (0.11 kg)