Single phase, enhanced performance cold rolled steel, dual capacitor energy-saving, high torque design. 4 pole, 1/3 to 10HP, ideal for numerous farming and industrial applications where high starting torque and low current draw is required. BASIC SPECIFICATIONS • Power Ratings from 1/3 to 10HP • Single Phase, 4 pole, Capacitor-Start Capacitor-Run • 115/208-230 & 208-230V 60Hz • Totally Enclosed Fan Cooled (TEFC) STANDARD FEATURES • Klixon manual reset thermal overload protectors • Over 300% starting torque • 1.15 Service Factor • 18 Month warranty • High quality Japanese switches with beryllium coated contacts • Cold rolled steel construction with cast iron end bells and c-flange kits • Rubber sealed bearings • 1045 Steel shaft • Surface finish: - Alkyd enamel RAL7024 - Graphite Gray - Black oxide under coat surface treatment for increased corrosion resistance • Stainless steel nameplate • Corrosion resistant hardware OPERATING PARAMETERS • Continuous (S1) duty • Ambient temperatures up to 40ºC • Installation up to 1000 MASL (3300 ft.) INGRESS PROTECTION The standard degree of enclosure protection is IP54 (Weather Proof). Both drive end and non-drive end are fitted with v-seals. Motors include high quality molded capacitor cover gaskets. Conduit box lid and body are sealed with fitted rubber gaskets. DE/NDE end bell fitted with sintered brass one-way drain. INSULATION RATING • Class F Insulation • Vacuum Impregnated • Designed to Class B temperature rise