Available with either 'inside' or 'outside' serrated ties these two piece assemblies simply push onto an edge with thicknesses from 1.0 to 3.0mm. The high 'pull off' forces are due to the integrated metal clamp. Different EdgeClip variations are available. One version allows for cables to run parallel to the edge, whilst another allows for installation at 90 degrees to the edge. The clip is simply pushed on by hand and held firmly in place by the integrated metal clamp. No fixing hole is necessary. Combined with the outside serrated (OS) ties, specially designed to protect cables from chafing and wear, the EdgeClip family provides an excellent fastening solution. Pre-assembled 2-piece fixing tie with EdgeClip Cable tie head can be moved after bundling EC9, EC10, EC21 and EC22 are for minimum bundle diameters of 1 mm For edges of 1 – 3 mm These cable ties and EdgeClip assemblies are ideal for use where holes are not acceptable or where due to temperature problems adhesives will fail. These assemblies are widely used for fixing and bundling cables, pipes and hoses within the automotive industry, harness making, panel building and electrical industry. Cable Tie Polyamide 6.6, heat stabilised (PA66HS) Colour Black (BK) CE Certification No CSA Certified No Flammability UL 94 HB Operating Temperature -40 °C to +105 °C, -40 °C to +110 °C Operating Temperature Foot Part (Metric) -40 °C to +105 °C ROHS compliant Yes