To feed through power, signal, and data is the classical requirement in electrical engineering and panel building. The insulating material, the connection system and the design of the terminal blocks are the differentiating features. A feed-through terminal block is suitable for joining and/or connecting one or more conductors. They could have one or more connection levels that are on the same potential or insulated against one another. High reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimizes operational safety Klippon® connect provides a proven response to a range of different requirements Version, screw connection, for screwable cross connection, one end without connector End cover plate required 2 potential and 2 level 2 clamping points per level One potential per tier TS 35 mounting rail 0.5 to 1.5 sq-mm twin wire end ferrules On side connection direction Lead free 41 A current at maximum wires 1 mOhm volume resistance according to IEC 60947-7-X 6 kV rated impulse withstand voltage Pollution degree 3 severity M3 screw connection Specifications Amperage Rating 32 A Color Beige/Yellow Connection Type Screw Dimensions 50 mm L x 6 mm W x 60.5 mm H Material Polyamide 66 Mounting Type Snap-On Number of Poles 4 Series SAK Temperature Rating -50 to 100 deg C Terminal Size 0.6 x 3.5 mm Terminal Type Blade Torque Rating 0.5 to 0.8 N-m Type 2-Tier Voltage Rating 500 VAC Wire Size 26 to 12 AWG Wire Strip Length 8 mm