To feed through power, signal, and data is the classical requirement in electrical engineering and panel building. The insulating material, the connection system and the design of the terminal blocks are the differentiating features. A feed-through terminal block is suitable for joining and/or connecting one or more conductors. They could have one or more connection levels that are on the same potential or insulated against one another. The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety Klippon® connect provides a proven response to a range of different requirements UL94 flammability rating - V-0 Version - screw connection, for screwable cross connection, one end without connector End cover plate required Two potential and two level Two clamping points per level One potential per tier TS 35 mounting rail 0.5 to 2.5 sq-mm twin wire end ferrules On side connection direction 10 A current at maximum wires 2.66 M3.0 volume resistance according to IEC 60947-7-x 6 kV rated impulse withstand voltage 3 pollution severity 2-tier Lead free M2.5 screw connection Specifications Amperage Rating 10 A Color Dark Beige Connection Type Screw Dimensions 2.736 in H x 0.201 in W x 2.461 in D Material Wemid Mounting Type Snap-On Number of Poles 4 Series W Series Temperature Rating -50 to 120 deg C Terminal Size 0.6 x 3.5 mm Terminal Type Blade Torque Rating 0.4 to 0.6 N-m Type Standard Voltage Rating 400 VAC Wire Size 26 AWG Wire Strip Length 10 mm