A protective feed through terminal block is an electrical conductor for the purpose of safety and is used in many applications. To establish the electrical and mechanical connection between copper conductors and the mounting support plate, PE terminal blocks are used. They have one or more contact points for connection with and/or bifurcation of protective earth conductors. Z-standard with wire cross-sections from 0.05 to 35 mm sq-mm and top entry wire insertion parallel to the screwdriver actuators Z-roof with wire cross-sections from 0.13 to 16 mm sq-mm, dimensions reduced by up to 36% and oblique operation direction Easy to use thanks to the large clamping space for the wire connections from 0.08 to 35 sq-mm, only one wire can be connected in each clamping unit The practical connection aligns the wire insertion direction and the screwdriver operating points, creating a top connection system for which no special tools are needed and which comes with an integrated test point UL 94 flammability rating V-0 1 number of levels, 3 number of clamping points per level Explosion-tested version, right open sides 0.6 x 3.5 mm blade 0.78 mOhm volume-resistance One end without connector 8 kV rated impulse withstand voltage ZPE 6-2/3AN type Specifications Color Green/Yellow Connection Type Tension Clamp Dimensions 2.677 in H x 0.319 in W x 1.937 in D Material Wemid Mounting Type Snap-On Series Z Series Temperature Rating -50 to 120 deg C Terminal Size 6 sq-mm Type 1-Tier Roof Style Voltage Rating 800 VAC Wire Size 22 to 8 AWG Wire Strip Length 12 mm