Experience enhanced performance and reliability with the redesigned SMC SY series valve. The SY7400-5U1-NA offers increased flow by up to 80% compared to its predecessors, allowing for a reduction in valve size. It features a built-in strainer in the pilot valve to prevent foreign matter issues and improved ozone resistance due to H-NBR seal material. Flexible installation is supported with side, top, and bottom port/pipe directions. This valve is available in body ported or base mounted styles and can be used individually or manifold mounted.The SMC SY7400-5U1-NA is a 5/3 way center exhaust solenoid valve designed for air. It operates within an ambient and fluid temperature range of -10 to 50°C (no freezing) and has an operating pressure range of -100 kPa to 0.7. The valve is available with a coil rated voltage of 24V DC or 12V DC. It boasts an enclosure rating of IP67 (based on IEC60529). The physical dimensions are 133.2 mm in length, 62.3 mm in height, and 22.4 mm in width. The actuator is a solenoid type with a brass material. The coil resistance is 100 ohms at 25°C, and the coil power is 0.3W at 24V DC, with a coil life of 10 million cycles. The nominal voltage is 24V DC, with an operating voltage range of 20-28V DC. The nominal current is 0.1A at 24V DC, and the nominal flow rate is 500cc/min at 6 bar. The connection type is threaded (M16 x 1.5).