STANDARD FEATURES Removable feet F1, F2, F0 field convertible 1.25 Service Factor with 60Hz operation / 1.0 Service Factor with 50Hz operation 36 Month warranty Conduit Box is 90º rotatable Cast aluminum construction with cast aluminum c-flanges Class I, Division II, Groups A, B, C and D compliant Anti-microbial (tropicalization) on stator winding Compact lightweight design Dual oversized shielded bearings 1045 Steel shaft Surface finish: Alkyd enamel RAL7024 - Graphite Gray Black oxide surface treatment for increased corrosion resistance Stainless steel nameplate Corrosion resistant hardware OPERATING PARAMETERS Continuous (S1) duty Ambient temperatures up to 40ºC Installation up to 1000 MASL (3300 ft.) CONNECTION 9-Lead 230V parallel-wye / 460V series-wye connection 3-Lead 575V wye connection INGRESS PROTECTION The standard degree of enclosure protection is IP55 (increased IP protection is available). Both drive end and non-drive end are fitted with double lip oil seals, including a rubber shaft slinger on the drive end. Terminal box is double gasketed. DE and NDE end bell fitted with sintered brass one-way drain. INSULATION AND INVERTER RATING Class F Insulation (Impregnation resin, magnet wire and insulation materials are Class H) Designed to Class B temperature rise Vacuum Impregnated Inverter Rated 15:1 Constant Torque, 30:1 Variable Torque (1.0 S.F. on VFD Power). Exceeds NEMA MG 1 Part 31.4.4.2 HP 1.5 RPM 1800 PHASE 3 VOLTAGE 575V MOUNTING Rigid/C-Flange ENCLOSURE TEFC